Catalog
Tectortherm 6
Quality, sustainability and energy efficiency in the construction sector are always in the front plain. Thermal insulation of buildings is in the center of these criteria. Materials used in modern construction and reconstruction work are not only strong and sustainable, but also suitable for the environment, use should be comfortable and longevity. Tectortherm 610 It is the lead as a leading solution to these requirements.
What is TECTORTORMERM 610?
Tectortherm 610 It is designed as cement-based, polymer and high-performance adhesive. This product is mainly In external thermostolation composite systems (ETICS) used and On mineral-based surfaces such as concrete, plaster, brick, gazbeton As well as insulation boards such as polystyrene (eps, XPS) and Dyt intended to be firmly glued.
Extensive application area
Tectortherm 610 One of the most important advantages of the in its most important benefits is its extensive application. This product can be easily used in internal and external places, both in new buildings, or in the renovation of existing buildings. The polystyrene and the stamping plates provide valid sticks to both smooth and rough surfaces.
Advantages - Why is TECTORTORM 610?
Many technical and functional advantages of this paster are available:
Freezing and melting resistant - Shows such reliable performance in hard climatic conditions.
Long-running period - Provides a wide time to the user during the application.
Easy to be prepared and applied - Ideal for individual users as much as for professional masters.
High-flexibility - Thanks to the polymer contributions, cracks and prevents breakdowns.
Strong adhesion - Provides firm adhesion on different surfaces and materials.
Corresponds to internal and external places - Allows you to use multi-state
These indicators are product + 23 ° C and 50% humidity are the consequences of tested in conditions. As the temperature and humidity change, the use of the use can also change accordingly.
The right application - a successful result
Tectortherm 610 The correct application of the replacement of the product maximizes the performance of the product. The application process is divided into three main stages:
1. Preparation of the surface
The surface must be dry, clean, dust-free and carrier. Paint, rust, paraffin remnants and other adhesion to weaken items should be completely clean. Suffering surfaces (eg, gazbeton) should be moistened before application. The weather should also be taken into account - it should not be used in strong solar, wind or rainy days, which is a risk of freezing.
2. Preparation of a mixture
The 610 bag of 25 kg of TECTORTORM 610 is mixed with clean water for 3-5 minutes and becomes homogeneous. After mixing mixed mixers (400-600 periods / min), 3-5 minutes are stored and then mixed 1 minute. The hardened solution cannot be added to the water again.
3. The application procedure
On the plasterless surfaces: the edges of the board are drawn in the form of a frame and in the middle of 3 points.
On smooth surfaces: applied directly to the plaque surface with adhesive combed goods.
Done on the plates: Initially, the thin layer is pumped into the primer, then the main glue is carried.
.webp)
Packaging and storage
Tectortherm 610 In 25 kg kraft bags, it is presented in a lined in the bags and polyethylene. Product within 12 months from the production date, in cool and dry conditions, should be stored in the original packaging.
Security measures
During the use Gloves, mask and protective glasses Wearing is recommended. Dust`s breathing tract should be prevented, and the hands should be washed after contact with the product.
If you are looking for a longevity, high adhesion and looking for an insulating adhesive of weather conditions, Tectortherm 610 It is the ideal choice for you. This product provides this product, energy efficiency and structural security with high technical indicators, easy application and extensive compatibility.
