TectorCeram 301 What is it?

TectorCeram 301 In the internal spaces - a high stability that can be applied on both wall and floor surfaces. This adhesive is used successfully in the installation of especially small tiles and ceramics. In places used as a bath, kitchen, corridor, this product gives both solid and aesthetic results. Thanks to high adhesion and easy application, both professional masters and individual users are a suitable choice.

His easy preparation and application should be specially recorded among the benefits of the product. After mixing for use, the ideal process provides an Ideal processing time, which allows the user to easily work. At the same time TectorCeram 301 With high quality and consumption optimization, it is financially in addition to the development of large areas.

TectorCeram 301 - Ideal solution for tile gluing

The quality of materials used in construction and repair work plays a decisive role in the success of the result. The application of coatings such as tile and ceramics is very important in terms of both aesthetic appearance, but also in terms of longevity. The quality of the adhesive product used in this work is undeniable. This is exactly this purpose TectorCeram 301 It is a cement-based adhesive that wins the trust of users with its own technical characteristics and use.

Technical indicators - proof of reliability

In a technical point of view TectorCeram 301 It`s a sufficient confidence. In case of dry installation of the product, the density is about 1.4 kg / m³, and in the mix of 1.5 kg / m³. Adhesion resistance is higher than 0.3 n / mm² in accordance with the International EN 12004-2 standard. These indicators confirm that he has given reliable and sustainable results in practice. The duration of the prepared mixture is about 2 hours, which is enough for the application process. At the same time, it is possible to start the tailor after completion of the tile is completed only 24 hours later. During this period, it gives optimal results by fully closed with the adhesive surface.

Rules for use - Guide for the right application

TectorCeram 301 It is very important to develop the surface to be applied before using. The surface must be firm, clean, dust-free and dry. If there are paint, fat, rust or paraffin remnants that may prevent sticking on the surface, they must be cleared. At the same time, if the surface temperature is higher than + 25 ° C or the surface is very water-absorbing, it is recommended to moisturize or primer. This preparations ensure that the glue is closer to the surface.

The mixing of the product must be carried out according to special rules. A clean coarse pre-measured amount of water - about 6.25 liters - added and gradually TectorCeram 301 the dust is mixed. This mixing process should be carried out in about 3-5 minutes, with a mixer in 400-600 periods / minutes. My mixture must be loud and homogenous. Then put the product for 3-5 minutes, then you need to mix 1 minute again. Thus, the adhesive is fully ready for the use. In addition, it should be noted that it is impossible to add water to a hardened mixture and reduces the effectiveness of this glue.

During the application, the adhesive is drawn to the surface in the first 1 mm thick by the smooth side of the goods. Later, the second layer is applied to the same area with the gear side of the Mal. This method allows the glue to spread more equally and in full contact with the surface adhesive. To eliminate the differences in thickness, which are possible under the tile, it is recommended to draw about 1 mm thickly adhesive. To ensure the tile is full of surface, each board should be placed lightly in the paster.

The tools and accessories used after the end of work should be immediately washed with water. If the product is dried, cleaning its surface is only possible in mechanical methods.

Consumption and packaging

TectorCeram 301 The consumption varies depending on the thickness of the folded layer and the selected goods. In total, average consumption for 1 mm thick is 1.27 kg. This indicates that the efficiency is high in use. The product is presented in 25 kg polyethylene lining in Kraft bags and can maintain its quality in a cool, dry and original packaging - in the conditions of proper detention.

Security measures

As for security issues TectorCeram 301 It is recommended to use protective gloves, glasses and masks when working with. This issue should be taken seriously because the product can fall into the way of breathing. It should also be avoided by contact with eye and skin.

In the end, it should be noted that TectorCeram 301 It is simply responsible for the quality of the product, and the correct management should be followed in the right instructions on how and where it will be used. Responsibility in inconsistent or incorrect application refers to the user.